INDUSTRY


 

Specially developed for French Navy, the Sauvegarde suit in addition to offer a high resistance to warfare agents is characterized by its very small packaging allowing being place in the Mask Bag and...

The approach fire clothe is used for specialized missions in fire fighting including rescue, extinguish in very extreme conditions, and protect for very high temperature, convective and radiant heat...

The reinforced MRV5 PMI suit, used in the majority of maintenance activities in contaminated areas, offers an uncompromising level of protection and wearing comfort. It meets the requirements of the...

The GPAL-INCURVE is simple in construction, compact and sturdy. The respiratory system is quick and easy to put on. To make the harness easier to clean, the GPAL-INCURVE has a system for quickly...

The MRV5 JUMPER suit, used in the majority of maintenance activities in contaminated areas, offers an uncompromising level of protection and wearing comfort.
It meets the requirements of the en 1073...

The GPAL is an open circuit self contained breathing apparatus reliable and compact allowing the user to protect efficacy the respiratory and eyes during fires and toxic fight intervention. The GPAL...

Our design department constantly in relationship with the architectural firm for the fire brigade plants is more and more specialized in SCBA TRAINING UNIT realization. Those units are designed to...

The Ergolier suit has been specially designed to ensure protection during use and manipulation of special product like fuel for satellites and Rocket (Ergol, Hydrazine…)

The PK17 suit, used in the majority of maintenance activities in contaminated areas, offers an uncompromising level of protection and wearing comfort. It has the same benefits as the MRV5 suit, with...

The emergency escape breathing device M20.2 is the world’s smallest….

Compact light and reliable, it can be worn comfortably on belt or stored in its orange container. Much more efficiency that a...

The MATIVENT Pink hood (controlled zone ZC) and the MATIVENT Natural hood (outside controlled zone ZC), with its robust and reliable design, is perfectly positioned on the wearer's shoulders thanks to...

TRIPLAIR is an open-circuit insulating respiratory system that provides long duration autonomy ( 60 minutes ) using  a cylinder unit holding 3 compressed air cylinders with a capacity of 3 litres at...

The UQUAR (Respirable air quality unit) is located upstream of the UFS and allows continuous measurement and monitoring of the breathable air quality of the network in accordance with the requirements...

The MATAIR is a compressed air line breathing apparatus with complete mask for respiratory protection named TOTAL 3 according European standard NF EN 136. The respiratory protection is insure with...

The MRV5 suit (Pink or Natural transparent), used in the majority of maintenance activities in contaminated areas, offers an uncompromising level of protection and wearing comfort. It meets the...

The GR3 reusable suit provides protection from liquid and gaseous chemical products (aerosols, liquids and solid particles). It is a non-ventilated type 1B suit (gas-tight in accordance with...

The SPMB (Source Portable Multi-Bottles) is placed in substitution of the spare bottles of the UFS or the BFS. It increases the respirable air backup capacity of the latter.

The MATAIR SECOURS is a compressed air line breathing apparatus with complete mask for respiratory protection, a safety device and switch automatic valve in case of air network breakdown. The safety...

The GR3 SOL protective suit provides the same levels of protection and comfort as the GR3. It also protect the SCBA worn inside the suit (type 1a).

The air breathable case with motorised reel is equipped with a motorized retractor. It is intended to facilitate the work when decontaminating the bottom of a nuclear power plant pool. This equipment...

The TOTAL 3 filtering mask conform according the EN136 benefited from the technologies improvement made for the breathing apparatus mask, proofness, wide vision field without any optical distortion.

The DM protective suit is composed of an envelope inside which a SCBA and its mask (type 1 a) can be used. Its panoramic anti-condensation visor gives the user a very wide angle of vision when...

All of our cartridge are realized with a EN148-1 standardized thread and covers all the protection range possible ie Gases, combined filter, particles …. All our cartridges are compact and light...

The GPAL QS is a SCBA benefiting from all the technological ad-vances on respiratory quality of high pressure and demand valve. lts sturdy frame made of polyamide reinforced with fiberglass gives it...

ULM protective suits are manufactured and assembled using technologies different from those used for elastomeric suits. They are composed of multilayer films that guarantee conformity with standard...

The MATITEST EVOLUTION is a test bench used to verify the proper functionning of open-circuit insulated respiratory systems. Controlled by a PLC, the test bench as a breathing machine that simulates...

The ALKYLATION process is used on chemical plants for treating the product derived from petroleum cracking operation. This process uses particularly aggressive chemical agents. MATISEC ALKYLATION...

The COMAT suit is a single-use category 3 PPE. The suit protects the skin against a large number of hazardous liquid chemicals.

The BAT suit, designed for high virology laboratory workers, present a very high fit factor level. Its design allows the wearer to work in sit down position associated with a wide vision field.

In case of emergency requiring SCBA, CHEMICAL SUIT, BAIL OUT or ESCAPE HOOD additional breathing air needs could appear. The breathing air trolley due to its light and compact design allows...

The air hoses MATISEC are designed both regarding raw material of the hose, nipple diameter and length in order to offer the minimum pressure drop. Each hose are controlled unitarily according...

Recently designed by our research and design department the air heater insure a comfortable breathing air temperature to the  PPE wearer ( supplied air masques, ventilated hood and suit)  during...

The breathing Air high pressure compressor range is results of BARGAZ Company buyout. The main reason involving MATISEC in this activity is to offer our customer a satisfactory and global solution to...

The mission duration time and cylinder needs increase more and more and forced the fire brigade to re fill on site cylinders. Due to this fact MATISEC manufacture mobile shelter including High...

More compact and less expensive than a compressor shelter our proposal is to manufacture high capacity mobile high pressure storage.

Powered by a high pressure rack or Medium Pressure compressor, those air distribution cabinet allows to set up a fully breathable air network. Transportable those cabinet is specially designed for...